Friday, May 6, 2011

Take it apart and glass and epoxy the underside of the deck

 I have carefully removed the deck and have glassed the underside and done a second coat of epoxy to fill the weave, I also put a second piece of glass about 10 inches wide behind the cockpit to reinforce the area that you sit on for entry.

Now the temporary bulkheads will get removed and I will clean up the inside of the hull so I can glue the deck on

Back to work after the cast came off. This is good therapy for my wrist



The cedar strip deck is done!  Now it is time to pop off the deck and glass and epoxy the underside of the deck.